7
DRum/cADDY AssemblY
(Ws1600cAeX0)
a.
Place cap nut on end of axle.
b.
Tap gently with hammer until fully
seated.
c.
Place wheel on the axle with
smooth portion of wheel facing
outward.
NOTE: Smooth side of the
wheel to the outside.
Caddy Left
Drain
Axle
w/Wheel
Caddy
Right
Open
End
Cap
Nut
Caddy
Right
Drain
Caddy
Left
Right
Caddy
Assembly
Left Caddy
Assembly
Drain
#10 x 1-3/4"
Screw (4)
Do not assemble until you have all the
parts.
With the power head and lid assembly
removed from the drum, and the drum
upside down on the floor:
1.
Insert caddy left and caddy right into
the bottom of drum as shown. Light
taps with a mallet or hammer may be
needed to fully seat both caddies.
2.
Install (4) #10 x 1-3/4” screws into
matching holes on both right and left
side of caddy, securing them to the
bottom of the drum. Tighten screws
until just snug. Do not over tighten as
this may tend to deform the caddies.
3.
Installing Cap Nut:
SP6935 Workshop _SP6439-3_ES.qxd 12/17/14 1:33 PM Page 7
