6
WET/DRY VAC ASSEMBLY
Your vacuum will come out of the box fully
assembled for your convenience.
Please check inside the dust drum for
additional components before using this
product.
To Remove the
Powerhead Assembly:
Grasp the drum latches on both the right
and left side of the powerhead assembly.
Slowly pull the drum latches away from the
dust drum. Lift the powerhead assembly off
the dust drum.
To Reassemble the
Powerhead Assembly:
1. Position the powerhead assembly with
the detachable blower handle of the
unit located above the vac inlet port on
the dust drum.
2. Lower the powerhead assembly onto
the dust drum. Rotate both latches
down until you hear them snap over the
drum latch catches.
Dust Drum
Drum Latch (2)
Powerhead
Assembly
Pull Out
And
Lift Up
Vac Inlet
Port
Dust Drum
Detachable
Blower Handle
Powerhead
Assembly
Dust Drum
Drum Latch (2)
Rotate
Down
Powerhead
Assembly
