Workrite Ergonomics | 800.959.9675 www.workriteergo.com
7 of 12
Attach Feet (sold separately) & Install Foot Glides
Install feet using #M6 × 14 mm Flat Head Screws(F) included with this
Frame Set.
Attach Foot Glide (H) to bottom of the Feet supplied in your Foot Kit.
Attach Switch
Install switch with two #8 × 5/8" Pan Head Screws (L).
Note: You may have purchased a Programmable Switch which
installs in the same manner.
Loop Power Cord through Strain Relief on Control Box
Loop the Power Cord (O) thought the strain relief
channel on the bottom of the Control Box (I) as
shown. Leave eight inches of slack to rout cord.
Plug Power Cord (O) into port AC on the Control
Box (I).
Lay the Control Box down in installation location
with cables in place.
Standard Switch
Programmable Switch
or
8"
8"
a
a
b
b
b
6
O
O
7
H
L
H
I
I
F
8
b
b
a
a
bottom
Flat Foot shown
Standard Switch shown
F
#M6 × 14 mm Flat Head
Cap Screw
Hardware at actual size
Caution!
Only use the #M6 × 14 mm Flat Head
Cap Screw (F) for assembly.
