Workrite Ergonomics BT-PROSWITCH, Руководство пользователя

Страница: 4 / 5

• Setting 2 : Reminder to stand up for 10 minutes after sitting for 50 minutes
• Setting 3 : Reminder to stand up for 15 minutes after sitting for 45 minutes
How Reminders work: The Switch will display a pulsing green light bar around the perimeter of the switch
when it is not time to change position. The switch changes to pulsing red when it’s time to change position
(Figure 7). Once you’ve changed your position
,
the switch will return to green until the next reminder.
ADJUSTING DISPLAY HEIGHT
*If you ha
ve purchased a Fundamental LX Sit-Stand Desk you will need to change your display height.
Set your display for the Fundamental LX.
Lower the table to the lowest position. Press and hold the Reminder Button (Bell Symbol) and the Bluetooth
Button (Bluetooth symbol) until the digital readout flashes. Lift up on the switch until the display reads
27.5”. Wait 10 seconds until the display quits flashing and the switch will save the new height setting.
Set you display height for special height requirements (Example: You’ve added casters to your sit stand
desk). Lower the table to the lowest position. Measure the distance from the floor to the top of your
worksurface. Note your height. Press and hold the Reminder Button (Bell Symbol) and the Bluetooth Button
(Bluetooth symbol) until the digital readout flashes. Lift up on the switch until the display reads the height
you have measured. Wait 10 seconds until the display quits flashing and the switch will save the new height
setting.
Figure 6
Press & hold the Bell symbol
to select the standard setting
Figure 7
Light Strip Reminder
Pulsing green light indicates
it is not time to change position
Pulsing red light indicates
it is time to change position
Setting 2
Setting 3