Workrite Ergonomics | 800.959.9675 www.workriteergo.com
4 of 8
CAUTION:
Maintain a 90° angle between each
respective Leg and Modesty Panel while inserting Cam Lock Dowels,
Cam Locks, and during the tightening process. Try to maintain a 90° angle
between each Leg and the Modesty Panel while sliding it in, and when
moving/aligning it to the worksurface. The Modesty Panel can be damaged if
too much angle is introduced.
2.2
Align the Modesty Panel (B) with the cam lock holes facing
inward and slide the Modesty Panel onto the Cam Lock
Dowels in the Left Leg (C) Connect with 3 Cam Locks (G)
Tighten cam locks with a Phillip screws driver as indicated
by the arrow on the Cam Lock.
2.3
Repeat Step 2.2 with the Right Leg (D)
F
F
Cam Lock Dowels
Cam Lock Dowels
B
Modesty Panel
Right Leg
Left Leg
Cam Locks
Cam Lock Covers
Cam Locks
G
G
Phillips Screwdriver
H
D
C
