WorkPro LS-Node Series, Руководство пользователя, Страница: 6 / 19

6
LS- Node
1.3 Box Content
The following items are included in the box:
LS-Node device: Depending on model: LS-Node1, LS-Node2, LS-Node4.
USB power cable ( 1m ): connect one end to the LS-Node and the other end to the
USB power adapter.
USB Power Adapter: To power the LS-Node, it includes different types of plugs for
worldwide use. Simply select the correct adapter to plug it in.
1.2 Product Description
This series of small devices are available in the same format as ¼ rackmount LS-Core and
are powered via USB-C or via PoE, which is useful when used in installations where they
can be racked using the optional LS-AR 19 accessory.
All LS-Node devices have an integrated two-port Ethernet switch and are multiprotocol,
supporting industry standards ArtNet and sACN.
LS-Node is fully compatible with LightShark consoles and can also be configured via a
internal webserver, allowing users to configure parameters such as frame rate (15 to 40 hz),
firmware updates, independent routing of DMX ports (any universe can be routed
to any of the DMX ports independently) and usage modes.
All models have several usage modes:
-Single mode: RDM/DMX to ArtNet/sACN converter, configurable via web.
-Merger mode: where the LS-Node can receive different universes (via ArtNet/sACN or
DMX) and merge them in the same output via HTP/LTP modes.
-Backup mode: when the LS-Node works in Backup mode with two connected consoles,
the device can detect a connection loss from the main console and switch automatically
to the Backup console, with a maximum latency of 3 seconds.
NOTE The Firmware version used to make this manual is v.0.19.