WorkPro LS-Node Series, Руководство пользователя, Страница: 13 / 19

13
LS- Node
2.3 Setting ports as output
From the PORT SETUP window, select the port you wish to configure and set the "PORT
DIRECTION" to "OUT".
By setting the port as output the LS-Node will convert the ArtNet or ACN information
received on the network ports to DMX via the XLR-5 output ports. It is possible to
configure the output mode ( MODE ) as SINGLE or as MERGER:
In this mode the LS-Node functions as a simple node, converting the ArtNet/ACN input to
DMX.
Single Mode
ArtNet/sACN TYPE-C:5v,2A
POE
POWER
RESET
DMX OUT DMX IN