Workhorse Luminator, Руководство пользователя

Страница: 13 / 17

13
3. (Continued)
To replace the ballast, first remove the glass. Next, Identify which bulb is not working (See page 14, Ballast to Lamp Relationship )
Lamp #1 Lamp #2 Lamp #3 Lamp #4 Lamp #5 Lamp #6
Image 2
Next locate the ballast covers located on the left and right sides. The position of the non functioning light will determine which
cover to remove. If the non functioning lamps are 1, 2, or 3 the left cover will need to be removed. If the non functioning lamps are
4, 5, or 6 the right cover will need to be removed (Image 3 and 4)
Image 3, Left Ballast Bank, Lamps 1-3
Image 4 Right Ballast Bank, Lamps 4-6
With the correct cover now removed, using the guide one page 15 to locate the faulty ballast. Once identified take notes of how
the original ballast is wired, then, with the unit unplugged remove the ballast and place the new ballast in the same location.
Connect the new ballast the same way the original was, if the correct plugs are not present on the new ballast use wire nuts to
secure the wires together. Replace the covers and glass, then plug the unit back in. With the new ballast installed the unit is now
ready for use.