Workhorse Freedom 6/8, Руководство пользователя

Страница: 11 / 22

11
To adjust the squeegee angle and pressure, turn the “print off”, loosen the squeegee pressure lock lever. To gain squeegee
pressure turn the squeegee pressure knob clockwise until the desired pressure is reached. To lighten squeegee pressure turn the
squeegee pressure knob counter clockwise until the desired pressure is reached.
Do not use pliers or extension pipes on any of
When in the flood position the print blade has about 1/2" inch clearance between the edge of the blade and the surface of the
screen. Push down on the print until it touches the Pallet. The flood blade should now have the 1/2" inch clearance from the blade
to the screen. Holding the print blade firmly against the pallet, synch down the squeegee/ flood levers to lock in the angle.
IMPORTANT NOTE: YOU MAY NEED TO ADD OR REDUCE BLADE ANGLES AND/OR PRESSURE ON SOME JOBS DUE TO OFF CONTACT,
INK VISCOSITY ETC.
MOST PRINTING WILL BE DONE USING YOUR 70 DUROMETER BLADE TO PRINT AND 80 DUROMETER TO FLOOD.HOWEVER WHEN A
HARDER BLADE IS REQUIRED, I.E., FOUR COLOR OR HALFTONES ON A SMALL MESH, FEEL FREE TO EXPERIMENT WITH PRINTING 80
DUROMETER AND FLOODING 70 DUROMETER.
Questions? Give us a call!
800.778.8779
workhorseproducts.com
Visit our website at