Workhorse Products QUARTZ FLASH, Руководство пользователя

Страница: 9 / 20

9
800.778.8779 | WORKHORSEPRODUCTS.COM
Attach the other end of the SO cable to
the power source.
It is recommended to use a ceiling drop as
the power source.
This allows the SO cable to lay across
the print head the flash is being used on;
eliminating the dangers of having cables
run along the ground.
(NOTE: The
flash in this
example may
be a different
model than
yours)
1.
2.
3.
1.
2.
3.
3.
ASSEMBLY
STEP 3: CONNECTING THE POWER & CONTROL
3-PHASE CONNECTION
Requires 3 hot wires and 1 ground wire
1-PHASE CONNECTION
Requires 2 hot wires and 1 ground wire
Feed the SO Cable up through the
Power Cable Access (A) from the
bottom of the control box.
Connect the 3 hot wires to the
open legs on the back of the power
distribution block (C, D and E).
Connect the earth ground wire to the
ground lug (B).
Feed the SO Cable up through the
Power Cable Access (A) from the
bottom of the control box.
Connect the 2 hot wires to the
open legs on the back of the power
distribution block (C and D).
Connect the earth ground wire to the
ground lug (B).
(A)
(A)
(B)
(B)
(C)
(C)
(D)
(D)
(E)