ECH67101/ECH67106
EXECUTIVE ECO LEATHER CHAIR
ASSEMBLY INSTRUCTIONS
© Office Star Products May 2009
9
PART
QTY
1. Base . . . . . . . . . . . . . . . . . . . . . . . 1
2. Casters . . . . . . . . . . . . . . . . . . . . . 5
3. Pneumatic Cylinder . . . . . . . . . . . . 1
4. Bellows . . . . . . . . . . . . . . . . . . . . . 1
5. Mechanism . . . . . . . . . . . . . . . . . . 1
6. Seat Cushion . . . . . . . . . . . . . . . . . 1
7. Back Cushion . . . . . . . . . . . . . . . . 1
8. Arms (8L & 8R) . . . . . . . . . . . . . . . 2
9. Short Screw . . . . . . . . . . . . . . . . . . 8
10. Long Screw . . . . . . . . . . . . . . . . . 4
11. End Caps . . . . . . . . . . . . . . . . . . . 4
12. Back Support (pre installed) . . . . 1
13. Allen Wrench (not shown) . . . . . . 1
Remove all parts from carton, separate by part numbers indicated on parts list, and verify part quantities.
STEP 1
Insert five Casters (2) into Base (1), push hard until you feel or hear the Caster (2) snap into place. Insert Pneumatic Cylinder (3) into Base (1) and slip
Belows (4) over Pneumatic Cylinder (3).
STEP 2
Attach Mechanism (5) to Seat Cushion (6) with the arrows towards the front of the chair, using four Short Screws (9).
FULLY TIGHTEN ALL SCREWS USING ALLEN WRENCH (13).
STEP 3
Attach Back Support (12) to Seat Cushion (6) on top of Mechanism (5) and secure using four Short Screws (9).
DO NOT FULLY TIGHTEN ALL SCREWS.
STEP 4
Attach Arms (8L & 8R) to Seat Cushion (6) and Back Cushion (7) using two Long Screws (10) for each Arm (8R & 8L).
FULLY TIGHTEN ALL SHORT AND LONG SCREWS BEFORE PROCEEDING.
Cover holes in Arms (
8L & 8R
) using two End Caps (11) for each Arm (8L & 8R).
Place the assembled seat on top of Pneumatic Cylinder (3) and apply downward pressure.
ATTENTION: MAKE SURE ALL SCREWS ARE FULLY TIGHTENED BEFORE USING CHAIR.
1
5
2
7
12
8
10
11
9
3
3
4
STEP 1
6
5
STEP 2
STEP 3
STEP 4
6
6
