2. Operating Guide
When this product is used for the first time, you'd better not input DMX or
Analogue,or set each channel as "0".
Without setting, Analogue input can be used directly.
When using DMX512, set DMX address according to the relevant menus.
DMX can be set by pressing the left or the right button. This can also be
achieved by turning the encoder without touching any button
To select the desired menu, tap the middle button. The menu pictures will
occur alternately.
Programming parameters by touching the left and right buttons, or turning
the encoder while not holding down the left and right buttons.
This product has three basic menus, a functional menu, a Chase menu
and two Curve menus. These menus can be switched over by pressing
the middle button or the left and right button.
6
3
Page 11
2.1 Top Menu
1. After "Power On", "Top Menu" is automatically shown in the display.
Functions:
2. This menu is the standard menu. All statuses, messages and input of
the channel s can be displayed within it.
3. In this menu, the channels can be set to the definable values.
Attentions shall be taken to each item below:
CAUTION:
6
3
2. Guia de Funcionamiento
2.3 Menu de Memoria
** MEMORIES
OFF
CHASE
MEMORY
1
2
3
4
5
6
7
8
9
1 0
11
1 2
OUT MEM
1
2
3
4
5
6
7
8
9
1 0
11
1 2
000.1
GO
M E N U
M E N U
1
2
3
4
5
6
7
8
Menu de Memoria
<<
<<
General
FUNCIONAMIENTO
Este menú aparece despues del menú de canal, una vez presionado el
botón menú, se activa, además se activa el modo supervisor.
En este menú un total de 12 memorias internas pueden ser almacenadas
Ademas, el chase puede ser seleccinado, la velocidad de ejecución, tiempo
de fundido y número de pasos pueden ser programados. El número de
pasos está limitado a 12 y cada paso es almacenado en su correspondiente
memoria interna.
Pagina 43
