LW 461R / LW 476R LIFTERS
LW 461R / LW 476R LIFTERS
- 3 -
- 4 -
USING & INSTALLATION USER MANUAL
USING & INSTALLATION USER MANUAL
DOUBLE BLOCKING SYSTEM
INTRODUCTION
New V.1204 blocking system applied to
LW 461 R & LW 476 R,
incorporates two security blocking systems.
The first system
(marked as A),
is the automatic system. It allows block a profile in a security point during the
folding process.
The second system (
marked as B
), is the manual system. It allows to block the profiles to transport the lifter and
to block the profile in a prefixed fixation position.
A
B
UNBLOCKED BLOCKED
A
B
UNBLOCKED BLOCKED
SPECIFICATIONS
MAX MIN
LOAD LOAD
UNFOLDED LIFTER FOLDED LIFTER
(KG) (KG)
HEIGHT BASE HEIGHT BASE WEIGHT
(M) (M) (M) (M) (KG)
LW 461 R
LW 476 R
250 30 6,1 2,00 x 1,85 1,90 0,70 x 0,60 140
220 30 7,6 2,00 x 1,85 1,90 0,70 x 0,60 163
6
CROSSED
TO
RIGHT
LW 461 R
LW 476 R
CABLE
WINCH
COMPOS. Ø RESIST.
LOAD
ROLL.
(mm) (N / mm2) (KN - KP) (KG/M)
6 x 19+1
Ø REDUCT.
RANGE.
BOBBING
( mm.)
48 3.75 : 1
6
19.6 - 1990
0,126
1770
(GALVANIZED)
DIN 15020 / VGB 1 / VGB 8
LW 461 R
LW 476 R
DIN 15020 / VGB 1 / VGB 8
STANDARDS & REGULATIONS
Standards and Regulations applied on
winches incorporated on each lifting tower.
FRONT SIDE
REAR SIDE
Do not elevate the tower
without using the stabilize
legs.
Place the tower over a flat
and stable surface.
Do not install it in a place
where the use over the
stabilize leg would not
be enough to reach a
perfect balance.
The two largest legs
must be placed in the
frontal tower side and the
shortest ones at both
winch sides.
Act individually over the
stabilize leg up to the
wheels lose contact with
the ground and enssuring a
perfect balance of the
tower. This balance will be
showed in the vial.
LOAD
Do not move away the
stabilizer legs after the
load is elevated.
SAFETY RULES
