Worcraft AG14-150S, Инструкция по эксплуатации

Страница: 45 / 63

Angle grinder
INTENDED USE
The angle grinder is a tool for cutting, scrubbing and brushing metal, concrete or tiles without using water.
The device is not intended for any other types of applications (e.g. grinding with unsuitable grinding tools, grinding with a coolant
solution, grinding or cutting hazardous materials such as asbestos).
The device is intended to be used by do-it-yourselfers. It was not designed for heavy commercial use.
The tool is to be used by adults. Children under the age of 16 may not use the tool except under supervision.
The manufacturer is not liable for damages caused by an improper use or incorrect operation of this device.
TECHNICAL SPECIFICATIONS (see fig. 1)
Model AG14-150S (AT3138X-150)
Voltage 220-230VAC 50Hz
Input power 1400W
No load speed 0-10000rpm
Wheel diameter
Ø150mm
Output spindle diameter M14
Insulation class II
Sound pressure level LpA=93,2dB(A), KpA=3dB(A)
Soung power level LwA=104,2dB(A), KwA=3dB(A)
Vibration level A
h,AG
=5,79 m/s
2
, K=1.5m/s
2
(main handle)
A
h,AG
=7,37 m/s
2
, K=1.5m/s
2
(Auxiliary handle)
●
NOISE/VIBRATION INFORMATION
The vibration level given in this information sheet has been measured in accordance with a standardised test given in EN
60745 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However,if the tool is used for different
applications, with different accessories or insertion tools or is poorly maintained, the vibration emission may differ. This may
significantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when
it is running but not actually doing the job. This may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work patterns.
EXPLANATION OF SYMBOLS
Attention! Pull out mains plug immediately, if the mains cable is
damaged, entangled or severed. Always remove the
mains plug before working on the device.
Read the manual.
Wear ear protection.
Wear eye protection Wear breathing protection
Risk of cuts!
Wear cut-resistant gloves Do not use for side grinding
Do not use for wet grinding Do not use defective discs
Suitable for metal Wear safety shoes
Electrical appliances must not be
disposed of with the domestic waste. Protection class II
PRODUCT ELEMENTS (see fig. 2)
1 Spindle 2 Inner flange
3 Spanner 4 Spindle lock
5 Auxiliary handle 6 Wheel guard
7 Outer flange 8 Switch trigger
9 Lock off knob 10 Hex wrench
11 Speed adjustment knob
GENERAL SAFETY RULES