Worcraft PROFESSIONAL CGT-S40LiBHP, Инструкция по эксплуатации

Страница: 51 / 67

COEDLESS BRUSH CUTTER
INTENDED USE
The product must only be used with the approved original cutting tool for trimming grass and weeds on trees, walls, posts, lawn
edges and other areas that are difficult to access with a lawnmower.
The product may not be used for commercial purposes.
The product must be operated according to the specifications in the instructions for use. Any improper use or any activities on
the product not described in these instructions for use are considered inadmissible misuse and outside of the manufacturer's
legal liability.
UNPACKING
Thanks for purchasing our product. Before assembly, checking all contents delivered. If something missing, please contact our
sales agent. Start by unpacking the equipment and check that it is complete. Dispose of the packaging material correctly.
1x tool body with rear shaft bar and right handle 1x front shaft bar 1x left handle
1x blade/spool protect cover 1x line spool 1x 3T blade
2x M6 inner hex bolt(with washer) 1x screwdriver 2x M10 nut
1x belt 1x rubber shaft cover 1x T type socket
1x 4mm hec wrench 1x 5mm hex wrench
TECHNICAL SPECIFICATIONS
Model / type CGT-S40LiBHP / RLB40DR-A Degree of protection IPX0
Voltage 40Vd.c. (2x20V d.c.) Insulation class III
Motor type BRUSHLESS Recommended battery CLB-20V-4.0
Blade Speed 4200 / 5200 / 6700 rpm Sound pressure level LpA=83,6dB(A), K=3dB(A)
Spool speed 4000 / 5000 / 6200 rpm Sound power level LwA=93,7dB(A), K=2,69dB(A)
Blade cutting circle
Ø255mm
Garantted power level 96dBA)
Spool line diameter
Ø1.6mm
Vibration Max ah:1,45m/s
2
, K=1,5m/s
2
Spool cutting circle
Ø380mm
Weight (without battery) 6.5kg
NOISE/VIBRATION INFORMATION
The stated values are emission values and do not necessarily represent safe workplace values. Although there is a correlation
between emission and immission levels, it is not possible to reliably derive whether additional precautions are necessary or not.
Factors influencing the immission level currently prevailing at the workplace include the nature of the workroom, other noise
sources, e.g. the number of machines and other work processes. Admissible workplace values can also vary from country to
country. However, this information should enable the user to better assess danger and risk.
PRODUCT ELEMENT (see fig.1)
1 Battery cartridge (not incleded) 16 Rear shaft bar
2 Upper battery charge compartment 17 Locking pin
3 Lower battery charge compartment 18 Fasten knob
4 LED battery indicator for upper battery 19 Front shaft bar
5 LED battery indicator for lower battery 20 Spool protect cover
6 LED battery indicator knob 21 Blade protect cover
7 Lowest speed indicator 22 Blade
8 Middle speed indicator 23 Gearbox maintenance bolt
9 Highest speed indicator 24 Gearbox
10 Power switch 25 Line spool
11 Actuating safety lock-off lever 26 Rubber protector head
12 Actuating trigger 27 T shape socket
13 Auxiliary handle 28 Belt
14 Safety spacer bar 29 4mm hex wrench
15 Back belt hook 30 5mm hex wrench
EXPLANATION OF SYMBOLS
Take particular care and attention. Pull out mains plug immediately, if the
mains cable is damaged, entangled or
severed. Always remove the mains plug
before working on the device.
Read instruction manual before
use Wear goggles, hearing protection and a
safety helmet.