Worcester Greenstar Sense I, Инструкция по установке и эксплуатации

Страница: 14 / 20

14
Information for installer
6 720 648 748 (2014/03)
Reset or power failure
In the event of a reset (with F.1 = 1), the Sense I goes back to its standard settings,
i. e. it appears after this as a zone controller with all its factory settings.
On restarting after a power failure, the Sense I appears as the previously configured
control, i. e. it may also appear as a room thermostat or zone controller with the
associated heating circuit allocation.
Operation
The following tables contain examples of how to change a value in the service menu.
Opening the service menu Result
▶ Press and hold control knob until two dashes appear.
▶ Release control knob to display the first setting.
Changing the setting (e.g. heating circuit H.C) Result
▶ Turn the control knob to select a setting.
▶ Press control knob to show the current value.
▶ Press control knob to change the value.
▶ Turn control knob to set the required value.
▶ Press the control knob to store the setting.
▶ Press and hold control knob until the setting is displayed again.
°C
°F
°C
°F
°C
°F
°C
°F
°C
°F
°C
°F
°C
°F
°C
°F