Malfunction or failure
Greenstar 8000 Style – 6720883869 (2021/05)
12
Fig. 7
Appliance minimum clearances
Table 7
[*]
Height for either 60/100 flue or 80/125 flue
8.2
Ventilation information
The air supply must not be restricted or contaminated.
Ventilation considerations
▶ Do not place objects to hinder the air circulation required by the
appliance.
▶ The installation premises may require ventilation to be fitted
according to its features or use.
9
Malfunction or failure
If you believe there is a problem with your central heating or hot water
supply, before you contact your installer/maintenance engineer and
report the error and appliance type carry out the following checks.
Basic checks
Some items to check before placing a call are:
• Is the electrical power switched on to the appliance?
• Is the programmer/timer set to ON or in an ON period?
• Is the room thermostat set too low?
• Is the cylinder thermostat (if fitted) set too low?
• Is the cold water main turned on?
• Sealed heating system:
– Is the static system pressure (when appliance is cold) between
1 and 1.5 bar?
• Do you have gas?
– Are other gas appliances working, gas cooker/hob for example?
– Has your credit run out on your gas pre-payment meter?
Details of your installer should be available in the Commissioning
Checklist or can be recorded in the following section.
Installer/maintenance engineer
Table 8
Worcester, Bosch Group
The appliance is supported in the UK and Eire by Worcester, Bosch
Group.
Specialist service engineers are available to attend an appliance
breakdown.
Invoices for attendance and repair work carried out on this appliance by
any third party will not be accepted.
• No charge will be made for parts and/or labour providing:
– The appliance fault is found and the appliance is within the
guarantee period. Reasonable evidence of this must be supplied
on request. i.e. a completed Commissioning and service record
and has been regularly serviced at least once a year.
• A call-out charge will be made where:
– The appliance is outside the guarantee period or has not been
serviced in accordance with the manufacturers instructions.
– Our Field Service Engineer finds no fault with the appliance.
– The cause of breakdown is misuse or with other parts of your
plumbing/heating system, or with equipment not supplied by
Worcester, Bosch Group.
Minimum clearances
Description
Dimensions [mm]
X
Appliance width
440
Y
Appliance height
780
Z
Appliance depth
365
Installation/Maintenance
1
Overall clearance height
1,150/1,190*
2
Overall clearance depth
965
3
In front of appliance
450
4
Overall clearance width
450
5
Above the appliance
170/210*
6
Either side of appliance
5
7
Below the appliance
200
8
Compartment depth
385
9
Appliance to removable door
20
0010012940-001
Installer/maintenance engineer details
Engineer name:
Company
name:
Company
address:
Telephone:
Email:
