Wopa SA0061, Руководство пользователя

Страница: 40 / 47

User manual
SA0061 Cattle Crush
Version: 09-07-18
Page 40 of 47
Figure 10: Details of filling of hydraulic unit
 Changing the fluid
No. What to do Action Outcome
1. Bring the fluid to the
tank.
 See the instruction on "emptying the
accumulator/gauging the fluid level".
2. Empty the tank

Open the front valve below the tank
and allow the fluid to run out until it is
empty.
Tank will empty.
3. Fill the system
 This must be done at the filter. First
clean the lid and the exterior of the
filter. Remove the filter lid on the top
of the tank by loosening the bolts.
Next remove the lid and fill the tank
through the orifice in the filter.

Use the correct type of fluid (Figure
11)
4. Check the fluid level.
 Check the oil level, as shown in
Figure 10.
Minimal fluid level
Maximal fluid level
Top up fluid to here