User manual
Hoof trimmingcrush:SA0049
Version: 22-12-15
Page 3 of 31
Introduction
Loon- en Mechanisatiebedrijf Wopa-Lichtenvoorde B.V. specialises in development and manufacture
of hoof trimming and treatment crushes for cows and bulls for professional users as well as for cattle
farmers.
Our crushes are developed and manufactured in the highest possible quality, according to the strictest
requirements as far as safety, user convenience, animal welfare and hygiene are concerned, always
striving for an optimum.
This manual contains information and instructions relevant to installation, operation and maintenance
of the machine.
The machine is not suitable for use in explosive hazardous environments.
All persons responsible for operation must, at minimum, read and comprehend
the sections on operation and safety of these operating instructions.
All persons responsible for assembly, installation, maintenance and/or repair
must read and comprehend all these operating instructions.
The user is responsible for interpretation and use of this manual under all
conditions. Should you have any doubts or questions regarding the correct
interpretation, please contact the owner or the supervisor.
Keep this manual nearby the installation and within the users' reach.
Keep a log of all major maintenance work, adaptations to the installations and
observations, see Annex 8.1.
Changes to the installation/machine are not permitted without prior written
approval from the supplier.
Contact the supplier for any special maintenance work not included in this
manual.
Comply with the safety requirements as given in Section 3 at all times.
Proper functioning as well as the safety of the system can only be guaranteed
if the recommended maintenance is carried out correctly and on time.
