液压修蹄系统使用说明
SA0039/SA0039B
Version: 24-09-14
第
21
页
图5：修蹄机从运输状态转换为工作状态的详细操作内容
编号
操作方法
操作结果
补充说明
1.
Tip the crush back.
•
Tip the crush so that the
drawbar is clear of the ground.
2.
Take tension off
the belly belt.
•
The belly belt (Figure 5:1)
holds the drawbar under tension
during transportation.
•
Loosen the belly belt.
This stabilises
the drawbar
during
transportation.
3.
Remove the drawbar.
•
Remove the locking pins (2*)
(Figure 5:2) and slide the
drawbar
frame
out
of
the
recesses.
4.
Remove the lighting
board.
•
Remove the lighting board from
the crush.
5.
Fold the rear gate
away.
•
Raise the rear gate.
6.
Tip the
crush
forwards.
•
Lift the rear of the crush so
that it tips forwards.
Lift by the rear
gate for less
force.
7.
Remove the
mudguards
•
Loosen the locking elements
(Figure 5:3) and lift the
mudguard out of the adapter.
6
7
8
9
1
2
3
4
5
