3
Your bike has had a full electrical check before despatch.
It has also had a general mechanical check, but you need to ensure yourself that when you complete the
assembly of your bike, that you also check the whole bike over before riding it.
You should be prepared to do this yourself, or if you are not sufficiently experienced, ask a local bike shop
to do this for you. A typical fee for this would be around £35-£45
A full inspection should include (but is not limited to):
Checking that the brakes are set correctly and work properly.
All nuts, bolts, major fixings, spokes and cranks etc. are correctly tightened.
Both wheels are properly trued
Headset/stem properly adjusted
Cranks are tight
Bottom bracket properly adjusted
•
Pedals, saddle and handlebars are correctly fitted and properly secured.
See the maintenance manual for how to adjust and maintain the various components of the bike.
Please note that failure to carry out these checks properly could result in serious injury for which Woosh
Bikes Ltd will not be held liable.
If you have any doubts about your own ability to perform the necessary checks, we strongly recommend
you visit your local bike shop and pay their fee. If you are unable to take your bike to a local bike shop
there will almost certainly be a mobile bike technician in your area who will come to your home or office
and do this for you.
Visit
www.cycletechuk.com
for a full national listing.
The type of motor used on this model may become noisier over time, if this is the case, you will need to
periodically send your wheel in to be serviced. The cost of servicing the wheel is £25 plus return postage.
This servicing is not covered by the warranty.
If you need to remove the motor wheel for any reason, you must re-grease the cavity where the cable
enters the wheel, this is to prevent moisture from getting into the motor. Doing this this will extend the
life of the motor and will avoid potentially expensive servicing costs. See the rear of this manual for de-
tails on this procedure.
