7
Pedelec Sensor for Octalink type crank sets:
The diameter of the Octalink axle is greater and so the regular pedelec disc cannot be used. We are how-
ever able to provide a solu on for this type of bo om bracket. We supply a modified pedelec disk which
has a larger hole in the centre which can be used, it needs to be secured to the back of your smallest
chain-
ring in the case of double or triple rings. The sensor itself is then a ached to the base of the seat
tube.
Pedelec disc
With the sensor in place as per the photo above, it now needs to be secured, the way you achieve this may vary depending on
your specific bike. In this example, we’re just using some cable
-
es.
The sensor is mounted at the base of the seat tube. The sensor is supplied with a single cable-
e which is use to secure the
sensor to the seat tube.
The sensor needs to line up with the magnets embedded in the disc, so that it can detect the magnets as they pass by.
Sensor
To controller
Cable-
e for
securing to
seat tube.
