manualshive.com logo in svg

Woody 5' lateral Brushcutter, Руководство оператора и по техническому обслуживанию, Страница: 17 / 20

Поделиться
Скачать
Woody 5' lateral Brushcutter Скачать руководство пользователя страница 17

17

Woody Equipment

Woody Brushcutter Operator’s and Maintenance Manual

Lubricating the Brushcutter

Lubricate the Brushcutter after it has been working for several hours because 

the new grease penetrates more easily when the old grease is hot. After lubricat-

ing, wipe excess grease from all surfaces of the Brushcutter.

Materials needed

•  Use EP2 grease type or equivalent to grease your Brushcutter. This grease 

can be used in summer conditions. 

•  Use EP1 grease type or equivalent to grease your Brushcutter. This grease 

can be used in winter conditions.

•  The grease should have excellent water-repulsion durability, antirust capa-

bilities, adhesive abilities and mechanical stability.

•  A grease gun adjusted to eject 2 cc/0.12 cubic in. of grease per pump. If you 

are using an automatic grease gun, verify that it pumps the correct amount.

WARNING

. Shut down the Brushcutter properly so working around 

it is safe.

Содержание 5' lateral Brushcutter





















Отзывы:

Нет отзывов