Woody 5' lateral Brushcutter Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 20

Woody 5' lateral Brushcutter Скачать руководство пользователя страница 13

13

Woody Equipment

Woody Brushcutter Operator’s and Maintenance Manual

Operation

Read this manual completely and make sure you understand it before operating

the Brushcutter.
The safety of all personnel in the work area depends on the proper operation

and maintenance of the Brushcutter. This section explains how to properly oper-

ate the Woody Brushcutters. The following procedures are covered:
• preparing to start up the Brushcutter,
• starting up the Brushcutter,
Refer to provincial or state regulations for the minimum age, training, and qualifi-

cations required to operate a Brushcutter.

WARNING

. Use the Brushcutter for operations that the product

was designed for only and use it according to the instructions given

in this manual. Woody assumes no liability or responsibility for prop-

erty damage, injury, or death that occurs as a result of not following

the instructions in this manual, or of any operation that does not

follow provincial or state regulations for Brushcutters.

«
...
11
12
13
14
15
...
»

Содержание 5' lateral Brushcutter





















Отзывы:

Нет отзывов