6
Third system:
If you are using a reserve parachute with directional control and dual bridle, or if your reserve parachute in any case has a double-riser bridle,
it can be connected to the harness using the two loops positioned at the base of the harness bridle, near the padded shoulder straps. In this
case, the harness’ reserve parachute bridle will not be used, and so it should be folded, fastened using two elastic bands, and positioned under
the cover behind the pilot’s neck.
The two connections should be made using screw-lock karabiners with a breaking strength of at least 1,400 kg. In any case, it is important to
verify that the length of the bridle is sufficient to position the reserve parachute inside the harness pocket, and that there is sufficient play to
enable the parachute to be taken out of the pocket without causing the reserve parachute deployment bag itself to open during extraction.