7
2.1.3- Inserting the reserve parachute
Insert the parachute in the harness container with the handle visible toward the outside and with the handle coupling loop to the float bag
facing upward. Make sure that the parachute is properly positioned between the seat and the elastic fabric used to adjust the volume of the
container. Immediately position the handle in its housing.
Introduce a thin rope (paragliding funicular strip type) into each elastic loop which you will use to help close the container. Introduce the
elastic loops into the smallest of the eyelets on the two straps inside the container and under the handle.
Adjust container volume according to the dimensions of the parachute, using the eyelets at the ends of the elastic fabric. If the parachute is
small in size, use the eyelet closest to the parachute itself while, if the parachute is large, use the other eyelet. To close the two elastic fabric
flaps, cross them over so as to maintain the parachute as close as possible to the seat.
