TRANSALP 2 - User manual
10
ENG
2.1.2- Inserting the reserve parachute
Connect the reserve parachute “V”bridle through the FRONT LIGHT RESCUE
CONTAINER ANTHRACITE ventral reserve parachute container “V”bridle by
means of the two loops. The emergency parachute should then be passed
through the large “V”bridle loop. The result is a connection that should be
tightened as much as possible so as to prevent dangerous friction between
the two cables during emergency opening shock.
The container “V”bridle has a Velcro fastener so that it can be attached to
the container once the “V”bridle is connected. Place the parachute and its
bundle in the container, keeping the handle facing upwards. To close the
container flaps, slide a thin cord (such as a paragliding cord) into each elas
-
tic loop, which will help you close the container.
Insert the elastic loops through the eyelets on the upper flap and then
through the lower flap, fasten the handle pins to the respective elastic
loops and, finally, remove the thin cord. Secure the handle to the container
with the Velcro so that it stays in its ideal position and does not open acci-
dentally, then insert the two pins into the holes in the lower flap.
