Woody Valley QUADRO 100 light, Руководство пользователя

Страница: 18 / 26

14
Handles for front and back containers are generally suspended in the central loop,
container on side or under the seat, the side strap used.
ATTENTION:
Note the instructions for the rescue unit in the operating instructions of your harness.
If there is no handle of the harness or it does not fit with your inner container, please
ask the dealer of your harness or your paragliding school.
The handle must be firmly connected to the loop on the inner container (opening strength
< 7daN).
4.7 - Attachment of the connection belt with the harness
For connecting the two belts use a fixable 24 kN- snap hook with a diameter of
minimum 8 mm. It is very important that the snap hook cannot twist to prevent rotation
stress of the snap hook.
Therefore use cable fixer, adhesive tape or strong rubber bands and pull it above and
below the snap hook around the belts.
Therefore use cable fixer, adhesive tape or strong rubber bands and pull it above and
below the knot around the belts.
ATTENTION:
Pay attention to the symmetry of both lines. Neither side of the loop should be longer than
the other.
A higher breaking force could otherwise endanger the release of the rescue system!