Woodway Engineering Ltd
Lower Road, Barnacle
Coventry, CV7 9LD
United Kingdom
Tel: +44 (0) 24 76 841750
Fax: +44 (0) 24 76 621796
www.woodwayengineering.com
I N S T A L L A T I O N G U I D E
2
This document is intended to be used as a reference guide for
the installation and operation of the Opti-Din Control System.
Every effort has been made to ensure the reliability and accuracy
of the information contained in this manual at the time of going
to press. However, specifications and procedures are subject
to change due to our constant endeavours to meet customer
requirements, and to maintain a research and development
process of continuous improvement for all Woodway products.
Woodway Engineering Ltd reserves the right to make changes
in product and documentation specifications and procedures
at any time and without notice. The information contained in
this manual is believed to be reliable and accurate with regard
to the Opti-Din Control System. The company shall not be held
liable for improper installation, operation, or maintenance of the
system in circumstances where procedures and specifications
have not been followed correctly. It is essential therefore, that
you follow the specifications, procedures, and recommendations
outlined in this manual.
Disclaimer
Important Installation and Safety Notes
CAUTION!
Modules and connectors are not waterproof. Install modules and cables in a dry location away
from excessive heat, humidity and any components likely to damage the system.
It is the installers responsibility to ensure that;
•
The method of installation does not damage or interfere with the vehicle equipment and wiring.
•
If the vehicle is fitted with airbags, the installation does not interfere with the operation or effectiveness
of the airbags, or this will cause the equipment to become a projectile that could cause death or injury.
•
All connections to chassis are taken direct to the battery.
•
Fuse ratings are changed to suit specific applications.
The proximity of certain radio equipment may interfere with Opti-Din data transmission. To reduce this
possibility, Opti-Din and radio equipment wiring should always be kept well apart and should not, under any
circumstances, be harnessed or fastened together.
The installers should supply all mounting fixings.
It is the user’s responsibility to ensure that;
•
The system is used in a safe and responsible manner to ensure the safety of both themselves, their
passengers, other road users and pedestrians.
•
The system and its installation are properly maintained to ensure its effective operation.
WARNING!
Failure to follow these safety precautions and instructions could result in damage to the product
or vehicle, and/or serious injury to your passengers.
