Woodwarm Stoves Fox Fire, Инструкция по установке и эксплуатации

Страница: 11 / 20

11
DE-ASHING
Using the tool provided (shown in yellow) the grate is gently and NOT FORCEFULLY rotated clockwise to open
and to de-ash and anti-clockwise to close and for the wood burning mode. A GENTLE ROCKING movement will
dislodge all but the largest clinkers through to the ashpan. Too much riddling/poking can result in unburnt fuel
being emptied into the ash pan and should be avoided. Any clinkers should be regularly removed from the fire
bed. In the larger models there are two ashpans for ease of use. The ashpan should be emptied regularly before it
becomes too full. Use the operating tool to handle the ashpan, taking care not to spill the ashes as there may well
be hot embers still glowing in the pan.
Never allow ash to accumulate in the ashpan so that it comes into
contact with the underside of the grate as this could impede the movement of the grate link bar and therefore the
movement of the grate bars and
will cause serious damage to the grate bars . Care should be taken that ash
is cool before emptying into plastic bin liners. If the grate bars will not rotate easily DO NOT FORCE them but
investigate the possible cause, i.e. clinker or nails blocking movement or too much ash in ashpan and in the
bottom of stove, and remedy as soon as possible.
“Tippy” ash caddies are available from your local stockist to assist in the removal of ashes from the house.
Diagram 6 Diagram 6A
Closed Open
COMMISSIONING
On completion of the installation and after allowing a suitable period of time for any fire cement or mortar joints
to dry out, the stove should be cleaned using a soft dry cloth. Check joints and seals. The stove can then be lit
and checked to ensure that smoke is taken from the appliance up the chimney and emitted safely.
The customer should be advised on the use of the appliance.
On completion of the installation and commissioning please leave these operating instructions with the
customer.
HETAS LTD APPROVAL
These appliances have been approved by HETAS Ltd as an intermittent operating appliance for burning the
fuels listed on page 12.