Woodward VariStroke-DX, Инструкция по установке и эксплуатации

Страница: 34 / 56

Manual 35132 VariStroke-DX Duplex Hydraulic Servo Skid
Woodward 32
Chapter 4.
Initial Operation
The following procedure should be performed in the order as stated while commissioning and tuning the
VS-DX skid:
Only trained personnel should be allowed to work on this device
during operation.
Incorrect action could cause release of pressurized oil which could
present a risk of burn or fire hazard.
Incorrect operation or improper tuning could cause erratic operation
when the system is operated automatically by the turbine control
system. Proper tuning is essential before transferring to automatic
operation.
Automatic process control should not be activated until the
commissioning procedure and device dynamic tuning for both units
is complete.
VS-GI will be switch to the shutdown condition when control signal is
set or drop below 2 mA.
A record of all parameters should be maintained by the user for future
reference to assist in determining the optimum values for similar
systems.
Released