background image

Load Sharing Module 

Manual 02035 

 

 

 

26 

Woodward 

Engineering Services 

 
Woodward offers various Engineering Services for our products. For these services, 
you can contact us by telephone, by email, or through the Woodward website. 

 Technical 

Support 

 Product 

Training 

 Field 

Service 

 

Technical Support

 is available from your equipment system supplier, your local Full-

Service Distributor, or from many of Woodward’s worldwide locations, depending 
upon the product and application. This service can assist you with technical 
questions or problem solving during the normal business hours of the Woodward 
location you contact. Emergency assistance is also available during non-business 
hours by phoning Woodward and stating the urgency of your problem. 
 

Product Training

 is available as standard classes at many of our worldwide 

locations. We also offer customized classes, which can be tailored to your needs 
and can be held at one of our locations or at your site. This training, conducted 
by experienced personnel, will assure that you will be able to maintain system 
reliability and availability. 
 

Field Service

 engineering on-site support is available, depending on the product 

and location, from many of our worldwide locations or from one of our Full-
Service Distributors. The field engineers are experienced both on Woodward 
products as well as on much of the non-Woodward equipment with which our 
products interface. 
 
For information on these services, please contact us via telephone, email us, or 
use our website and reference 

www.woodward.com/support

, and then 

Customer Support

 
 

How to Contact Woodward 

 
For assistance, call one of the following Woodward facilities to obtain the address 
and phone number of the facility nearest your location where you will be able to 
get information and service. 
 

Electrical Power Systems 

Facility --------------- Phone Number 

Australia ----------- +61  (2) 9758 2322 
Brazil ------------- +55 (19) 3708 4800 
China ------------ +86 (512) 6762 6727 
Germany: 
 

Kempen --- +49 (0) 21 52 14 51 

 

Stuttgart ----- +49 (711) 78954-0 

India --------------- +91 (129) 4097100 
Japan -------------- +81 (43) 213-2191 
Korea--------------- +82 (51) 636-7080 
 
Poland -------------- +48 12 618 92 00 
United States----- +1 (970) 482-5811 

Engine Systems 

Facility --------------- Phone Number 

Australia ----------- +61  (2) 9758 2322 
Brazil ------------- +55 (19) 3708 4800 
China ------------ +86 (512) 6762 6727 
Germany: 
 
 

Stuttgart ----- +49 (711) 78954-0 

India --------------- +91 (129) 4097100 
Japan -------------- +81 (43) 213-2191 
Korea--------------- +82 (51) 636-7080 
The Netherlands - +31 (23) 5661111 
 
United States----- +1 (970) 482-5811 

Turbine Systems 

Facility --------------- Phone Number 

Australia ----------- +61  (2) 9758 2322 
Brazil ------------- +55 (19) 3708 4800 
China ------------ +86 (512) 6762 6727 
 
 
 
India --------------- +91 (129) 4097100 
Japan -------------- +81 (43) 213-2191 
Korea--------------- +82 (51) 636-7080 
The Netherlands - +31 (23) 5661111 
 
United States----- +1 (970) 482-5811 

 
You can also contact the Woodward Customer Service Department or consult our 
worldwide directory on Woodward’s website (

www.woodward.com/support

for the name of your nearest Woodward distributor or service facility. 
 
For the most current product support and contact information, please refer to the 
latest version of publication 

51337

 at 

www.woodward.com/publications

Содержание 9907-252





































Отзывы: