30
MAINTENANCE
Replacing the blade
ATTENTION:
Always shut off and disconnect the machine before maintenance or replacing
the saw blade.
-
Press the lever (X) down and hold it down in order to lock the blade.
-
Use the provided wrench or spanner to loosen the saw blade nut. Rotate the nut clock-
wise.
-
Remove the blade.
-
Clean the flange carefully before installing the new blade.
-
Install the blade and reassemble in reverse order.
-
ATTENTION:
Check the rotation direction of the blade.
-
Before restarting make sure that all the safety and protection devices work properly.
-
When the blade is installed make sure that it rotates unrestricted.
-
Start the machine and let it run without load before you start sawing.
Periodic maintenance
The saw will work properly only if it is maintained carefully. Improper mainte-
nance may lead to unexpected accidents or damages.
-
Unplug the machine before any maintenance.
-
Clean the plastic parts with a moist cloth.
-
Do not use cleaning products, solvents or pointed objects for cleaning.
-
Remove dirt on the table surface with proper cleaning spray.
-
If it takes more than 10 seconds for the motor to stop, the wearing parts must be re-
placed.
-
After use remove the dust from the ventilation openings and moving parts with a soft
brush.
-
Lubricate all moving parts regularly.
-
Do not use compressed air jets for cleaning!
-
Regularly check the blade: if difficulties should arise during cutting, have it sharpened by
skilled personnel or replace it if necessary.
