32
Base moulding
Base moulding can be cut vertically against fence or flat on the table.
Vertical Horizontal
Crown moulding can only be cut flat on the table using this mitre saw. This mitre saw has
special mitre stops of 31.6° left and right. In addition there is a bevel stop of 33.9° for a spe-
cial crown moulding 1 i.e. 52° between the back of the moulding and the top flat surface
that fits against the ceiling; 38° between the back of the moulding and the bottom flat sur-
face that fits against the wall. Refer to the following table for this crown moulding cut.
