background image

Model W1782 34˚ Angle Finish Nailer

-7-

A safety mechanism on the nose of 
the nailer protects against accidental 
firing. When the trigger is pressed, the 
nailer will not fire until the safety nose 
mechanism is depressed.

Before you use your nailer for the first 
time, check the safety nose mechanism 
to ensure proper function.

To check the safety nose mechanism, 
do these steps:

1.

  DISCONNECT NAILER FROM THE AIR 

SUPPLY!

2.

  Make sure the magazine is empty and 

contains no nails.

3.

  Make sure the trigger and the safety  

nose mechanism move up and down 
without sticking.

4.

  Connect the nailer to the air supply.

5.

 

Without pressing the trigger

depress the safety nose mechanism 
against a scrap piece of wood that is 
clean and free of any knots, nails, or 
other foreign objects. 

—  If the nailer 

does not fire

, then 

the safety nose mechanism is 
working correctly. 

—  If the nailer 

does fire

 when you do 

this, immediately disconnect the 
nailer from the air supply and call 
Technical Support.

Safety Nose Mechanism

—  If the nailer fires when the trigger 

is pulled, without the safety nose 
mechanism being depressed, then 
the nailer is not working properly.

—  If you find that the safety 

nose mechanism is not working 
properly, check the lubrication of 
its sliding components.

The safety mechanism is a mechanical 
device that can fail. Never rely on this 
mechanism as an excuse to point the 
nailer at yourself or any bystanders. 
Serious injury may occur.

Operating  this  nailer  can  propel 
objects into the air, causing immediate 
eye  damage.  To  protect  yourself, 
always  wear  ANSI  approved  safety 
glasses or goggles when operating this 
equipment. 

Do  not  attempt  to  modify  or  bypass 
the  safety  nose  mechanism  to  make 
the  nailer  fire  without  pushing  the 
nose down.

Содержание W1782





















Отзывы: