ADJUSTMENTS
-18-
To adjust the 45˚ inward angle stop bolt, do
these steps:
1.
Slide the 90˚ stop slide away from the back
of the fence
.
2.
Using a 45˚ square, position the fence 45˚
relative to the table surface.
3.
Loosen the jam nut on the 45˚ inward stop
bolt (
Figure 23
)
.
4.
Adjust the 45˚ inward stop bolt until it
makes contact with the back of the fence.
5.
Retighten the jam nut loosened in
step 3
.
To adjust the 45˚ outward angle stop bolt, do
these steps:
1.
Using a sliding bevel adjusted to 135˚, posi-
tion the fence 135˚ (45˚ outward) relative
to the table surface.
2.
Loosen the jam nut on the 45˚ outward stop
bolt (
Figure 24
)
.
3.
Adjust the 45˚ outward stop bolt until it
makes contact with the fence adjusting
bracket.
4.
Retighten the jam nut loosened in
step 2
.
Figure 23.
45˚ inward angle stop bolt.
Figure 24.
45˚ outward angle stop bolt.