Woodstock Shop Fox W1666 страница 7 Скачать руководство пользователя

Страница: 7 / 32

-7-

SAFETY

W1666, W1685 Dust Collectors

SAFETY

READ MANUAL BEFORE OPERATING MACHINE.

FAILURE TO FOLLOW INSTRUCTIONS BELOW WILL

RESULT IN PERSONAL INJURY.

Standard Safety Instructions

1. Thoroughly read the Instruction Manual before operating your machine.

Learn the applications,

limitations and potential hazards of this machine. Keep the manual in a safe and convenient place

for future reference.

Keep work area clean and well lighted.

Clutter and inadequate lighting invite potential hazards.

Ground all tools.

If a machine is equipped with a three-prong plug, it must be plugged into a

three-hole grounded electrical receptacle or grounded extension cord. If using an adapter to aid in

accommodating a two-hole receptacle, ground using a screw to a known ground.

Wear eye protection at all times.

Use safety glasses with side shields or safety goggles that meet

the appropriate standards of the American National Standards Institute (ANSI).

Avoid dangerous environments.

DO NOT operate this machine in wet or open flame environments.

Airborne dust particles could cause an explosion and severe fire hazard.

Ensure all guards are securely in place

and in working condition.

Make sure switch is in the

OFF

position

before connecting power to machine.

Keep work area clean,

free of clutter, grease, etc.

Keep children and visitors away.

Visitors must be kept at a safe distance while operating unit.

10.

Childproof your workshop

with padlocks, master switches or by removing starter keys.

11.

Stop and disconnect the machine when cleaning, adjusting or servicing.

Indicates an imminently hazardous situation which, if not avoided, WILL

result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, COULD

result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, MAY

result in minor or moderate injury.

This symbol is used to alert the user to useful information about proper

operation of the equipment, and/or a situation that may cause damage

to the machinery.

NOTICE

Содержание Shop Fox W1666

































Результаты поиска

Содержание Shop Fox W1666

Отзывы:

Похожие инструкции для Shop Fox W1666

Бренды по названию

Популярные бренды

Woodstock Shop Fox W1666, Инструкция по эксплуатации

Результаты поиска

Содержание Shop Fox W1666

Отзывы:

Похожие инструкции для Shop Fox W1666

Бренды по названию

Популярные бренды