Woodstock Shop Fox Fence W1410, Руководство по эксплуатации

Страница: 20 / 29

Shop Fox
®
Fence -19-
C C.. W WO OO OD D F FA AC CIIN NG G
The Shop Fox ® Fence can be faced with 3 ⁄
4
" kiln
dried hardwood, plywood or medium density fiber
board (MDF) to ensure that the aluminum fence
does not come into contact with the blade during
close sawing and dadoing operations. If using kiln
dried lumber, use a piece that is free of knots and
other defects and preferably a species that exhibits
dimensional stability such as maple, birch or
beech.
C CA AU UT TIIO ON N:: It is extremely important to attach the
wood facing correctly. Lumber less the
3
⁄
4
" is not
recommended. Screws or fasteners must be
counter sunk at least
1
⁄
8
" below the wood surface,
but no more than
1
⁄
4
".
To attach the wood facing to the fence:
S Stteep p 1 1..
Size a suitable piece of wood to the face of the
fence.
S Stteep p 2 2..
Drill and counterbore at least two mounting holes
in the wood face piece. Refer to F
Fiig gu urree 2 27 7 as a
guide for hole placement. D Do o n no ott d drriillll iin n tth hee ssh haad d--
eed d aarreeaa..
S Stteep p 3 3..
Transfer these mounting holes to the fence and
drill suitably sized holes for self tapping screws or
through bolts. If using through bolts, it will be
necessary to drill through the fence on both sides.
S Stteep p 4 4..
Attach the wood facing to the fence, making sure
the screws are counterbored well below the wood
surface. Do not over tighten the self tapping
screws to the point of stripping the holes in the
aluminum fence.
F Fiig gu urree 2 27 7.. Side view of the fence. D Do o n no ott d drriillll iin n
tth hee ssh haad deed d aarreeaa ffo orr aattttaacch hiin ng g w wo oo od d ffaacciin ng g..