Woodstock D2796, Руководство по эксплуатации

Страница: 12 / 25

Figure 14 shows the template set back an additional
1
/
8
" for
a 1" thick board. The inside faces are showing.
- 10 - Woodstock Intl., Inc. D2796
ADJUSTMENTS
3.
For side pieces thicker than 7 /
8
", add 1 /
8
" to the
amount that the board exceeds
7
/
8
". Then, set the
front edge of the template fingers back from the
edge by that sum. See
Figure 13 and 14.
1/8" + y
y
7/8"
A
y = (Thickness of A) - 7/8"
Figure 13. Correct template adjustment for stock thicker
than
7
⁄
8
".
The template is adjustable from front to back so that the
joint will be hidden when the dovetails are complete.
Adjustment is made by loosening the two template lock
knobs. Do not adjust the screws holding the template.
To adjust the template to the proper position:
1. Mount your drawer pieces in the jig. The horizon-
tal piece must be tight and flush with the top of the
vertical piece. When mounted correctly, the top
edge of the vertical piece sits flush with the top of
the horizontal piece. See
Figure 11.
1/8" 7/8" or Less
Figure 12. Correct template adjustment for stock
7
⁄
8
" thick
and less.
TEMPLATE ADJUSTMENT
Figure 11 shows the proper positioning between the hori-
zontal and vertical workpieces when mounted in the dove-
tail jig.
2. For side pieces that are
7
/
8
" thick and less, slide the
template so the front edge of the template fingers
are
1
/
8
" back from the top edge of the vertical
piece. See
Figure 12.