Page 5
•
Use suitable means to move the unit: eg� A lift truck or fork pallet trucks (the forks should reach more completely beneath the unit)
•
Check the unit for damage before and after unpacking� If unit is damaged, contact the distributor and manufacturer
•
Should any item have physical damage, report the details to the freight company and to the agent responsible for the dispatch within
seven (7) days of receipt� No claims will be accepted or processed after this period
•
The unit is supplied fully assembled
•
Remove all protective plastic fi lm, tapes, ties and packers before installing and operating
•
Clean off any remaining residue from the interior/exterior of the unit using a clean cloth dampened with warm soapy water
•
Choose an area that is well ventilated and provides access for future maintenance
•
Place the unit on a level stable work surface capable of supporting its weight
•
Do not position the unit in a wet area, an area with a lot of heat and steam or near fl ammable substances
•
Allow an air gap between the unit and other objects or surfaces� We recommend a minimum gap of 100mm for normal operational use
(if the unit is near any heat sensitive material we suggest you allow additional space)
•
Please consult national and local standards to ensure that your unit is positioned in accordance with any existing requirement
•
At the end of the appliance’s working life, make sure it is scrapped & components recycled properly
•
Current environmental protection laws in the state/country of use must be observed
•
Doors must be removed before disposal
•
Power supply cable must be removed before disposal
•
For further information on the recycling of this product, contact the local dealer/agent or the local body responsible for waste disposal
WARNING
Improper installation, adjustments, alterations, service or
maintenance can cause property damage, injury or death.
Installation
Setting Up
Handling
Unpacking
Positioning
Disposal
Содержание W.GPC350
Страница 2: ...Page Intentionally Left Blank Page 1...