Woodson W.GPC350, Техническое описание, инструкция по установке и эксплуатации, Страница: 15 / 15

Page 14
Operation
Troubleshooting
Task Type - (O) = Operator
(T) = Technician Task
Problem Possible Causes Task Possible Corrective Action
Unit not heating
Unit not turned “on” at the
power supply
O Turn power to “on” at the power supply
“On/Off” not turned on O Switch on power on the control panel
Thermal Safety fuse blown T Call service technician
Plates too Cold
Allow ready light to turn off
before cooking
O
Temperature requires adjusting T Refer to temperature adjustment in the manual
Element failure
Test & replace the element
if necessary
Plates too Hot Temperature requires adjusting T Refer to temperature adjustment in the manual
Relay or thermostat failure T
Test & replace the relay and/or thermostat
if necessary
Food sticks to surface of plates Plates too hot O Adjust temperature
No Grease/Oil to lubricate
surface of plates
O Apply film of oil to plates
Plates not clean O Clean Plates
WARNING
Technician tasks are only to be completed by qualified service
people. Check faults before calling service technician.