Page 20
Due to continuous product research and development,
the information contained herein is subject to change without notice.
www.stoddart.com.au
www.stoddart.co.nz
Power-Saving Temperature:
Click the “power-saving temperature” value� Use the
tabs to adjust the parameter value�
(100°C - 180°C)� The default temperature is 150°C
Idle Time:
Click the “idle time” value� Use the
tabs to adjust the parameter value� (0 - 30 minutes)� The default idle time is 20
minutes� Oven automatically enters power-saving mode after idle time� (When “0”is selected oven will not enter the energy saving mode)
Temperature zone:
Click the “temperature” value� Use the
tabs to adjust the parameter value� (5°C - 30°C)� The default
temperature zone is 25°C� This function is strongly recommended for high volume use� After setting the temperature zone, the device will
start cooking without having to reach the set temperature (For example, if the set temperature is 200°C and the set temperature zone is
30°C, then the device will enter the cooking status when the device’s actual temperature reaches
(170°C - 230°C)
Standby Temperature:
Click the “standby temperature” value� Use the
tabs to adjust the parameter value� (200°C -
250°C)� The default temperature is 200°C
Parameter Value Up:
Increase the value of the selected parameter
Parameter Value Down:
Decrease the value of the selected parameter
Save:
After completing cooking recipe, click the tab save and exit from the Parameters Interface
A
B
C
D
Return:
Clicking the “return” tab will exit out of the Parameters interface� Any changes made will not be saved
G
E
F
H
A
B
C
D
G
E
F
H
10.
Change Default Settings: To change the default settings click on the “default settings” tab in the Oven Configuration�
Note: This will overwrite any existing manual settings on the oven every time a USB upload is done
Operation
