Indoor Wi-Fi Wall Switch INSTALLATION INSTRUCTIONS
Made in China
WALL
Hot wire
(Black)
Load wire
(Black/Red)
Neutral
(White)
Neutral
(White)
Ground
(Green)
3/4” (1.9 cm)
Straighten each wire and strip
3/4 in. (1.9 cm) of insulation
from each wire.
5. Tighten all screws firmly.
Insert the ground (green) or bare wire(s) into the hole(s)
labeled G (near green screw).
Insert the two neutral (white) wires into the holes labeled
N (near silver screw).
Insert the hot (black) wire into the hole labeled L-I
(near brass screw).
Insert the load (black/red) wire into the hole labeled
L-O (near brass screw). The screw terminal accepts
14AWG-12AWG copper wire (12AWG maximum).
1.
2.
3.
4.
Carefully fold wires into wall box and mount WiOn Wall
Switch into wall box using mounting screws (CC), then
attach a standard decorator-style wall plate (not included)
using screws (DD).
Restore power by flipping the circuit breaker to the ON
position or re-installing the fuse to the circuit.
6.
7.
CC
CC
DD
DD
Wall Plate
(not included)
!
IMPORTANT
: This device is to be installed in a wall box measuring at least 3 in. x 2 in. x 2-1/2 in. (7.6 x 5 x 6.3 cm) (standard single gang
electrical wall box) and wired in accordance with National Electrical Code.
WARNING
: To avoid fire or electric shock, make sure power is OFF before beginning installation.
