CTC201207 07/19
Step 11: Disassembly
Step 10: Fully assembled
Step 12: Packing the tent
Tent appears as shown.
Step 9: Secure guy lines
1) Secure tent using all guy lines and stakes.
Tent must be secured for proper function.
2) Vents at the rear of the tent may be staked
open.
1) To take down the tent, disassemble in
reverse order.
2) Be sure to leave doors and windows
unzipped to avoid zipper damage.
3) Remove stakes with hammers or stake
puller. DO NOT pull on tent.
4) Carefully disengage poles from fast feet.
Push poles away from you through the
sleeves to minimize risk of damage to
tent or poles.
5) Keep poles and stakes together in bags
provided.
1) Spread tent flat, distribute evenly.
2) Fold into quarters not to exceed the length
of pole bag.
3) Lay pole bag at opposite end from door.
Tightly roll bag, skin and fly forcing air
through unzipped door.
4) Secure with ties and place in carry bag with
stakes and accessories.
5) Tent must be clean and dry before storage.
Store off concrete floor.
Be certain campfires are extinguished.
Dispose of trash appropriately.
Dimension A should
be close to but not
exceed the length
of the pole bag.
A
Fold tent into a
rectangular shape.
Front of tent
(door unzipped)
Step 8: Attach the inner tent
Step 6:
Fasten hooks
1) Clip the plastic hooks on the
tent to the fibreglass pole frame.
2) Extend the vestibule staking the side walls.
1) At the back of the tent, position the inner tent floor side down.
2) Attach the inner tent floor by attaching S-hooks to loops along the perimeter.
3) Starting at the back of the tent, attach toggles along the back seam to o-rings along the roof
and walls of the outer tent. Repeat along the front seam.
Step 7: Attach door pole
1) Insert the fly pole (C) through the sleeve
found at the edge of the awning, over
the side door.
2) Flex the pole and insert each end into the
reinforced metal grommets located on
either side of the door in the black webbing.
