Step 1 : Verify package contents
Tent : 1
Step 2 : Assemble poles
1) Assemble the tent poles by placing
fibreglass sections into the metal ferrules.
Three poles are provided:
2 (A) Main poles (Black)
1( B ) Fly pole (L. Gray)
Rainfly : 1
Tent Stakes : 20
Step 3 : Spread out tent, insert poles
1) Spread out the tent flat, floor side down.
2) Position poles (A) so they cross at the centre
of the tent. Make certain the centre of the
poles meet at the centre of the tent and
loosely fasten the fabric ties.
CTC180909-1(076-2936-2)
ASSEMBLY INSTRUCTIONS
Gear Loft w/TP : 1
Step 4 : Main poles
1) With a person holding each end of pole (A), flex the pole into an arch. Carefully place
the ends into the fast feet located at the stake loops.
2) Repeat this step for the other tent pole (A).
3) Clip the plastic hooks on the tent to the fiberglass pole frame.
Fibreglass Poles : 3 (total)
( ) denotes color coding
(A) Main (Black) 2
(B) Fly (L. Gray) 1
A
A
CTC180909-1 06/17
IMPORTANT NOTES:
* Assemble your tent before camping to become
familiar with the assembly.
* Two people are recommended for setup.
* Select a clean, level area for the campsites, free
of debris and sharp objects, away from any
natural watercourse.
* Use of a ground cloth is recommended to
prolong the life of the tent floor and provide
additional insulation and moisture protection.
* To prevent damage to the zippers, unzip the
doors and windows of the tent prior to
disassembly, allowing air to move freely.
* Seam-seal the inside stitched seams of the tent.
This will improve weather resistance. Available
in sporting goods departments. Discolouration
may occur if applied to outside seams.
Step 5 : Stake tent
1) Stake down the tent by inserting a stake
through the stake loops, located along the
perimeter of the tent.
2) Make certain the tent floor is pulled out
evenly and tightly.
3) Hammer the stakes into the ground at a
45˚ angle using a hammer or mallet.
