Post Sleeve Bushing Replacement
Most Sawmill Models
ABG CALIBRATION—HM130MAX
Reverse the disassembly steps in section,
, to reinstall
the adjustable blade guide on the HM130MAX
When reinstalling the carriage, do not fully tighten the four (4) button head screws. Snug them
to where the carriage is not loose but not so tight that the carriage cannot pivot.
**Some components removed for clarity.**
When the guide arm has been installed, check that it slides smoothly between the V-rollers. If it
feels too loose or too tight, adjust the bottom eccentric roller using a wrench. Turning it counter-
clockwise will tighten the arm movement; turning it clockwise will loosen the movement.
PSBR-MY2020-EN: Rev A
Page
of
15
16
29-Jul-2020
Do not fully tighten
button head screws.
Carriage will pivot
about this screw when
adjusting for level.
Counter-clockwise
: tighten
arm movement
Clockwise
: loosen arm
movement
Eccentric V-Roller
