Identify and verify that you have all the parts listed.
Read the instructions at least once, familiarizing yourself
with the parts before beginning. You'll need a #3 Phillips
screwdriver and a 7/16" wrench for assembly.
3265
Micro Adjuster
Please Read Carefully!
Part#
Description
Qty.
WB002
Washer
2
Part#
Description
Qty.
5770B
1/2" Screw
1
Part#
Description
Qty.
5772B
1" Screw
1
Part#
Description
Qty.
NUT015 Nut
2
Part#
Description
Qty.
WL002
Lock Washer
1
Parts List:
Parts listed below are not shown in the hardware
drawings. Refer to photos in the instructions:
Part
Description
Quantity
4523
Micro Adjuster . . . . . . . . . . . . . . . . . . . . 1
Assemble the 4523 Micro Adjuster according
to the instructions that come with it. You will
not use the 1" stud, 10-24 nut, 10-24 set screw
or 3/32" allen wrench. It should look like the
image on the right when assembled.
See fig. A
Install the lock washer (WL002) on the
1" screw (5772B) and insert it thru the hole in
the short edge of the bracket (3265A). Install a
washer (WB002) and nut (NUT015) on the screw.
Screw the nut on until almost tight.
See fig. B
Install a washer (WB002) on the 1/2"
screw (5770B), insert the screw thru the hole
in the long face of the bracket and start a
nut (NUT015) on the screw.
See fig. B
Screw the knurled knob
of the Micro Adjuster on the
1" screw until it's about 1/16"
away from the nut. Assembly
is complete.
See fig. C
A
B
C
5772B x1
WL002 x1
NUT015 x1
NUT015 x1
5770B x1
WB002 x1
4523
Assembly
3265A
