Parts
Carefully unpack Miter Gauge
and all loose items.
Figure 2
illustrates parts supplied
with the Miter Gauge.
A. Handle
B.
Fence & Ruler Tape
C.
Flat Nylon Washer
D.
Flat PVC Washer (3)
E.
Knurled Knob (2)
F.
Miter Gauge Assembly
G.
Lock Knob
H. Flip-Stop
I. T-Bolt
J.
Square Nut
K.
3mm Hex Wrench
ASSEMBLY
STEP 1:
Assemble Knob
Figure 3
Place the Flat Nylon Washer (C) above the
arc groove in the Miter Gauge Assembly (F),
and thread the stem of the Handle (A) into the
Miter Gauge Assembly (F).
STEP 2:
Snugging Miter Bar
Figure 4
Use the 3mm Hex Wrench (K) to apply spring
pressure forcing the miter bar to one side of
the table saw miter slot.
A
H
B
E
I
F
Figure 2
C
D
G
J
K
Figure 3
Figure 4
