Bistro Installation and Operation Manual
Questions? Call Wood Stone at 1-800-578-6836
8
May
2008
MOVING THE BISTRO
1.
Use a forklift or other suitable lifting
means to set the main body onto blocks
as shown. If the optional decorative logset
was included, remove it before tipping the
main body.
2.
Install the side pieces of the tipping
assembly.
3.
Bolt the side piece in place as shown,
and attach the cross-piece using the
hardware provided.
Install a clevis in the top hole of each side
piece of the tipping assembly. Use these
for attachment of a lifting strap or chain.
If you received your Bistro disassembled, and you don't need to
tilt it to move through a door or narrow passageway, refer to the
exploded parts diagram on page 10, and go to page 11 for assembly
instructions.
If you received the Bistro disassembled and need to move it through
a narrow door or passageway, follow the instructions below...
Cut away view.
Bolt
If your Bistro was originally shipped assembled, the optional lifting system is available
from Wood Stone.
