manualshive.com logo in svg

Wood Stone Mountain Home WS-MH-4-RFG-IR, Инструкция по установке и эксплуатации

Поделиться
Скачать
Wood Stone Mountain Home WS-MH-4-RFG-IR Скачать руководство пользователя страница 7

Unloading and Moving

7

Mountain Home Oven Installation and Operation Manual

LIFTING THE APPLIANCE 

1. 

USING A CRANE 

The appliance arrives with four lifting eyes attached. When craning,  

use a spreader bar with a two-legged sling rigged on each end. The  

spreader bar should be of a sufficient length to keep the sling from  

contacting the unit. 

NOTE: Once lifting eyes are no longer needed, remove the lifting  

eyes one at a time and be sure to replace the bolts that attach to  

the appliance stand.

2. 

USING A FORKLIFT 

Be sure to use a forklift rated, and folks the minumum length, as 

shown below. If necessary, fork  extensions must be used so the  forks 

extend through the fork lift pockets to the opposite side of the stand.  

Lift from either side as shown. Do not lift from the front or the back. 

The appliance is very top heavy, so spread the forks as far apart as 

possible.

3. 

 USING A PALLET JACK 

Once the appliance has been removed from the delivery vehicle, it 

can easily be moved on flat surfaces using a pallet jack. To lift the 

appliance with a pallet jack, remove the front and rear angle iron stabilizers  

from the base of the stand and place a stout 4x4 post through the fork pocket  

as shown. The appliance is VERY TOP-HEAVY, MOVING THE appliance UP OR  

DOWN A RAMP OR INCLINE ON A PALLET JACK IS NOT SAFE!

4x4 post

Model

Approximate 

ship weight

Minimum fork 

length required

Required forklift 

capacity

WS-MH-4

2,400 lbs.

4'

5,000 lbs.

WS-MH-5

3,600 lbs.

5'

6,000 lbs.

WS-MH-6

4,600 lbs.

6'

6,000 lbs.

WS-MH-7

6,000 lbs.

7'

9,000 lbs.

DO NOT TURN THE APPLIANCE ON ITS SIDE!

Contact Wood Stone if the appliance must be turned on its side for specific instructions. Moving a Wood Stone 

appliance can present interesting challenges to even the most experienced riggers. Take your time, use your head, 

secure the proper equipment and make safety your first priority. Please don’t hesitate to call the factory for techni-

cal support. 

DELIVERY NOTE:

 The customer will receive a Shipping Notification when the unit leaves the Wood Stone 

factory. This will include a PRO# and a trucking company contact number. Wood Stone recommends that you 

confirm the delivery date/time with the trucking company before committing to heavy equipment and/or labor. 

Our goal is a smooth and safe delivery.

Lifting eyes

woodstonehome.com

[email protected]

tf. 800.578.6836

f. 360.734.0223

Wood Stone Corporation

1801 W. Bakerview Rd.

Bellingham, WA 98226 U.S.A.

An ongoing program of product improvement may require us to change specifications without notice. 

M0005.01

Rev. May 2014

Содержание Mountain Home WS-MH-4-RFG-IR




































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды